Logging Commands; Logging Buffered; Logging Buffered Wrap - NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-

15.3 Logging Commands

This section describes the commands you use to configure system logging, and to view
logs and the logging settings.

15.3.1 logging buffered

This command enables logging to an in-memory log that keeps up to 128 logs.
Default
Format
Mode
15.3.1.1 no logging buffered
This command disables logging to in-memory log.
Format
Mode

15.3.2 logging buffered wrap

This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
Format
Mode
15.3.2.1 no logging wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
Mode
15-22
disabled; critical
logging buffered
Global Config
no logging buffered
Global Config
enabled
logging buffered wrap
Privileged EXEC
no logging buffered wrap
Privileged EXEC
v1.0, February 2007
System Maintenance Commands