NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 197

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Link Trap Mode
STP Mode
Mbr Ports
Port Speed
Type
Active Ports
Port-Channel/LAG (802.3ad) Commands
This object determines whether or not to send a trap when
link status changes. The factory default is enabled.
The Spanning Tree Protocol Administrative Mode associated
with the port or port-channel (LAG). The possible values are:
Disable - Spanning tree is disabled for this port.
Enable - Spanning tree is enabled for this port.
A listing of the ports that are members of this port-channel
(LAG), in slot/port notation. There can be a maximum of
eight ports assigned to a given port-channel (LAG).
Speed of the port-channel port.
This field displays the status designating whether a particular
port-channel (LAG) is statically or dynamically maintained.
Static - The port-channel is statically maintained.
Dynamic - The port-channel is dynamically maintained.
This field lists ports that are actively participating in the port-
channel (LAG).
v1.0, February 2007
12-7