NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 270

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Table 15-1. Copy Parameters (continued)
Source
nvram:startup-config
nvram:traplog
system:running-config
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
<url>
15-20
Destination
<url>
<url>
nvram:startup-config
nvram:clibanner
nvram:script
<destfilename>
nvram:sshkeydsa
nvram:sshkeyrsa1
nvram:sshkeyrsa1
nvram:sslpemroot
nvram:sslpemserver
nvram:sslpemdhweak
nvram:sslpemdhstron
g
nvram:startup-config
system:image
v1.0, February 2007
Description
Copies the startup configuration to a
server.
Copies the trap log file to a server.
Saves the running configuration to
nvram.
Downloads the CLI banner to the
system.
Downloads a configuration script file
to the system. During the download
of a configuration script, the copy
command validates the script. In
case of any error, the command lists
all the lines at the end of the
validation process and prompts you
to confirm before copying the script
file.
Downloads an SSH key file. For more
information, see Section 3.5 "Secure
Shell (SSH) Command" on
page 3-15.
Downloads an SSH key file.
Downloads an SSH key file.
Downloads an HTTP secure-server
certificate. For more information, see
Section 3.6 "Hypertext Transfer
Protocol (HTTP) Commands" on
page 3-17.
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads an HTTP secure-server
certificate.
Downloads the startup configuration
file to the system.
Downloads a code image to the
system.
System Maintenance Commands