NETGEAR GSM7212 - ProSafe Switch Cli Reference Manual page 181

Command Line Interface Reference for the ProSafe 7200 Series Layer-2 Switches, Software Ver-
Supplicant
Timeout
Server Timeout
Maximum
Requests
Reauthentication
Period
Reauthentication
Enabled
Key Transmission
Enabled
Control Direction
If you use the optional parameter
statistics for the specified port appear.
Port
EAPOL Frames
Received
EAPOL Frames
Transmitted
EAPOL Start
Frames Received
Port-Based Access and Authentication Commands
The timer used by the authenticator state machine on this port
to timeout the supplicant. The value, in seconds, has a range
of 1 - 65535.
The timer used by the authenticator on this port to timeout the
authentication server. The value, in seconds, has a range of 1
- 65535.
The maximum number of times the authenticator state
machine on this port will retransmit an EAPOL EAP
Request/Identity before timing out the supplicant. The value
will be in the range of 1 and 10.
The timer used by the authenticator state machine on this port
to determine when reauthentication of the supplicant takes
place. The value, in seconds, has a range of 1 - 65535.
Indicates if reauthentication is enabled on this port. Possible
values are 'True" or "False".
Indicates if the key is transmitted to the supplicant for the
specified port. Possible values are True or False.
Indicates the control direction for the specified port or ports.
Possible values are both or in.
[statistics <slot/port>]
The interface whose statistics are displayed.
The number of valid EAPOL frames of any type that have
been received by this authenticator.
The number of EAPOL frames of any type that have been
transmitted by this authenticator.
The number of EAPOL start frames that have been received
by this authenticator.
v1.0, February 2007
, the following dot1x
11-11