Front And Back Panel Features - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Front and Back Panel Features

IPS-4240 and the IPS-4255 do not support redundant power supplies.
Note

Front and Back Panel Features

This section describes the IPS-4240 and IPS-4255 front and back panel features and indicators.
Although the graphics show IPS-4240, the IPS-4255 has the same front and back panel features and
Note
indicators.
Figure 5-1
Figure 5-1
Table 5-1
Table 5-1
Indicator
Power
Status
Flash
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
5-2
shows the front view of IPS-4240 and IPS-4255.
IPS-4240/IPS-4255 Front Panel Features
describes the front panel indicators on IPS-4240 and IPS-4255.
Front Panel Indicators
Description
Off indicates no power. Green when the power supply is running.
Blinks green while the power-up diagnostics are running or the system is booting. Solid
green when the system has passed power-up diagnostics. Solid amber when the
power-up diagnostics have failed.
Off when the compact flash device is not being accessed. Blinks green when the
compact flash device is being accessed.
Chapter 5
PWR STATUS FLASH
Power Flash
Status
Installing IPS-4240 and IPS-4255
Cisco IPS 4240
series
Intrusion Prevention Sensor
78-16124-01