Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual page 67

Chapter 3 Installing IDS-4215
Grasp the 4FE card and pull it out of the slot and through the cage opening.
Step 9
Replace the lower slot cover from the back cover plate.
Step 10
Replace the back cover plate and tighten the two captive screws.
Step 11
Replace the chassis cover.
Step 12
For the procedure, see
78-16124-01
Replacing the Chassis Cover, page
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
Removing and Installing the 4FE Card
3-13.
3-21