Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual page 111

Chapter 5 Installing IPS-4240 and IPS-4255
For the procedure, see
Upgrade the appliance with the most recent Cisco IPS software.
Step 9
For the procedure, see
You are now ready to configure intrusion prevention on the appliance.
For More Information
• For the procedure for using HTTPS to log in to IDM, refer to
• For the procedures for configuring intrusion prevention on your sensor, refer to the following
documents:
–
–
78-16124-01
Initializing the Sensor, page
Obtaining Cisco IPS Software, page
Installing and Using Cisco Intrusion Prevention System Device Manager 5.0
Configuring the Cisco Intrusion Prevention System Sensor Using the Command Line Interface
5.0
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
Installing IPS-4240 and IPS-4255
9-2.
10-1.
Logging In to IDM.
5-9