Hardware And Software Requirements; Indicators; Chapter 6 Installing Aip-Ssm - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Hardware and Software Requirements

Hardware and Software Requirements
AIP-SSM has the following hardware and software requirements:
•
•
•
•

Indicators

Figure 6-1
Figure 6-1
Table 6-3
Table 6-3
1
2
3
4
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
6-2
Cisco ASA 5500 series adaptive security appliance
ASA 5510 (AIP-SSM-10)
–
ASA 5520 (AIP-SSM-10 and AIP-SSM-20)
–
– ASA 5540 (AIP-SSM-20)
Cisco Adaptive Security Appliance Software 7.0 or higher
Cisco Intrusion Prevention System Software 5.0(2) or higher
DES or 3DES-enabled
shows the AIP-SSM indicators.
AIP-SSM Indicators
describes the AIP-SSM indicators.
AIP-SSM Indicators
LED Color State
PWR Green On
STATUS Green Flashing
Solid
LINK/ACT Green Solid
Flashing
SPEED Green 100 MB
1000 MB
Amber
(GigabitEthernet)
3 4
1 2
Description
The system has power.
The system is booting.
The system has passed power-up diagnostics.
There is Ethernet link.
There is Ethernet activity.
There is network activity.
There is network activity.
Chapter 6 Installing AIP-SSM
78-16124-01