Back-Panel Features And Indicators - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Back-Panel Features and Indicators

1. If the system is connected to AC power and an error has been detected, the amber system status indicator will flash regardless
Back-Panel Features and Indicators
Figure 4-2
IDS-4250.
Appliances with only one power supply should connect the power cable to connector PS1.
Note
Figure 4-2 Back-Panel Features and Indicators
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
4-4
of whether the system has been powered on
shows the controls, indicators, and connectors located on the back panel of the IDS-4235 or
PCI expansion card slots
Sensing interface: 4250-SX: GigabitEthernet2/0
4250-XL: GigabitEthernet2/0
4250-4FE: FastEthernet1/0
SCSI interface (unused)
System status indicator (blue and amber)
Command and Control
interface: GigabitEthernet0/1
Sensing interface: GigabitEthernet0/0
Mouse connector (unused)
Serial connector (Com1)
Video connector
Keyboard connector
System status indicator
connector
System identification button
Chapter 4 Installing IDS-4235 and IDS-4250
GigabitEthernet2/1
FastEthernet1/1
FastEthernet1/2
FastEthernet1/3
Redundant
power
(optional)
Main power
78-16124-01