Specifications; Software And Hardware Requirements; Hardware Architecture - Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual

Installing NM-CIDS
This chapter lists the software and hardware requirements of NM-CIDS, and describes how to install and
remove it.
Note In Cisco IOS documentation, NM-CIDS is referred to as the Cisco IDS network module.
Note NM-CIDS does not support inline (IPS) mode. It can only be configured for promiscuous (IDS) mode.
This chapter contains the following sections:
•
•
•
•
•
•

Specifications

Table 8-1
Table 8-1
Specification
Dimensions (H x W x D)
Weight
Operating temperature
Nonoperating temperature
Humidity
Operating altitude
78-16124-01
Specifications, page 8-1
Software and Hardware Requirements, page 8-2
Hardware Architecture, page 8-3
Front Panel Features, page 8-4
Interfaces, page 8-4
Installation and Removal Instructions, page 8-5
lists the specifications for NM-CIDS.
NM-CIDS Specifications
C H A P T E R
Description
1.55 x 7.10 x 7.2 in. (3.9 x 18.0 x 19.3 cm)
1.5 lb (0.7 kg) (maximum)
+32° to +104°F (+0° to +40°C)
–40° to +185°F (–40° to +85°C)
5% to 95% noncondensing
0 to 10,000 ft (0 to 3,000 m)
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
8
8-1