Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual page 73

Chapter 4 Installing IDS-4235 and IDS-4250
Figure 4-1
(Not used)
Keyboard connector
The power button controls the AC power input to the power supplies of IDS-4235 and IDS-4250.
You can use the identification buttons on the front and back panels to locate a particular IDS-4235 or
IDS-4250 in a rack. When you push one of these buttons, the blue system status indicator on the front
and back blinks until you push one of the buttons again.
The front panel also has a video connector for connecting a monitor and a PS/2 connector for connecting
a keyboard.
Table 4-1
Table 4-1
LED Indicator
Blue and amber
system status
indicator
NIC1 and NIC2
link and activity
indicators
Hard-disk drive
indicator
Power button
78-16124-01
Front-Panel Features and Indicators
1
2
System
status indicator
(blue and amber)
Identification button
Power button
describes the appearance of the front panel indicators for IDS-4235 and IDS-4250.
Front-Panel Indicators
Icon Description
The blue system status indicator lights up during normal system
operation. The amber system status indicator flashes when the
system needs attention due to a problem with power supplies, fans,
system temperature, or hard drives.
The link and activity indicators for the two integrated NICs light up
when the NICs are in use.
1
The green hard-disk drive activity indicator flashes when the
hard-disk drive is in use.
The power button lights up when the system power is on.
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
CD drive
NIC1 indicator
Hard drive
NIC2 indicator
Hard drive indicator
1
2
Latch for
System door
Video connector
Front-Panel Features and Indicators
Diskette drive
1
4-3