Cisco IPS-4240-K9 - Intrusion Protection Sys 4240 Installation Manual page 89

Chapter 4 Installing IDS-4235 and IDS-4250
Figure 4-6
At the back of the cabinet, pull back on the mounting-bracket flange until the mounting holes align with
Step 6
their respective holes on the back vertical rail.
Install three 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange's holes to secure the
Step 7
slide assembly to the back vertical rail.
Step 8 Repeat Steps 3 through 7 for the remaining slide assembly on the other side of the rack.
Step 9 Ensure that the slide assemblies are mounted at the same position on the vertical rails on each side of the
rack.
78-16124-01
Slide Assemblies
Installing Cisco Intrusion Prevention System Appliances and Modules 5.0
Installing the Accessories
4-19