Monitoring Sccp Phone Statistics - Cisco SRST - 881 EN Security Router Wireless Manual

User guide
Hide thumbs Also See for SRST - 881 EN Security Router Wireless:
Table of Contents

Advertisement

Configuration
Setany -v2c <ip addr> test csrstNotificationEnabled.0 -i 1
When the SRST has at least 1 SCCP phone with DN associated with it, an "SRST system state change
Step 2
up" trap is generated.
*Mar 10 23:13:15.632: SNMP: V1 Trap, ent ciscoMgmt.441, addr 1.4.196.1, gentrap 6,
spectrap 1
ciscoMgmt.441.2.2.2.1.2.1 = 2
ciscoMgmt.441.1.3.1.2.1 = 1
ciscoMgmt.441.2.2.2.2.2.1 = SRST system state change up

Monitoring SCCP Phone Statistics

To monitor SCCP phone statistics, perform the following steps:
Step 1
Register the Ephones to the SRST router.
Issue the following CLI command:
Step 2
Show ephone summary
Verify the response to show Ephone summary is similar to the following:
Step 3
SRST-Router#sh ephone summary
ephone-1 Mac:000F.24BA.2C37 TCP socket:[1] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:1.4.196.42 7912
ephone-2 Mac:0011.BBEF.7554 TCP socket:[2] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:1.4.196.2 Telecaster 7960
ephone-3 Mac:000D.2808.427F TCP socket:[3] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0
IP:1.4.196.3 Telecaster 7960
Max 10, Registered 3, Unregistered 0, Deceased 0, Sockets 3
ephone_send_packet process switched 0
Max Conferences 8 with 0 active (8 allowed)
Skinny Music On Hold Status
Active MOH clients 0 (max 480), Media Clients 0
No MOH file loaded
Issue the following SNMP request:
Step 4
Getmany -v2c <ip addr> test ccmeActiveStats
Verify the response for the getmany request is similar to the following:
Step 5
moki:1931> getmany -v2c 1.4.196.1 test ccmeActiveStats
ccmeEphoneCallLegs.0 = 0
ccmeEphoneTot.0 = 3
ccmeEphoneTotRegistered.0 = 3
ccmeEphoneTotKeyPhConfigured.0 = 0
ccmeEphoneTotKeyPhRegistered.0 = 0
ccmeEphoneDeviceName.1 = SEP000F24BA2C37
ccmeEphoneDeviceName.2 = SEP000D2808427F
ccmeEphoneDeviceName.3 = SEP0011BBEF7554
Cisco SRST SNMP MIB Release 3.4 Guide
1-22
keepalive 2
1:1 2:2
CM Fallback
keepalive 2
keepalive 1
Chapter 1
Cisco SRST SNMP MIB Support
CM Fallback
CM Fallback
OL-7959-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Srst snmp mib 3.4

Table of Contents