1-15.Operational Restrictions - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Note:
An alarm message is displayed at lower right part of the radar screen.
1-15. Operational restrictions
AIS function is not available when the manual speed input or SET/DRIFT data is used and following
operational restrictions exist
1) An AIS function cannot turn ON
・When "MANUAL" was selected as a speed input source.
・When SET and DRIFT was set in "LOG" speed mode
2) "LOG" speed mode cannot be chosen as a speed source.
・When an AIS function was ON and SET and DRIFT were set.
3) "MANUAL" speed mode cannot be selected..
・When an AIS function was ON.
4) DRIFT／SET (Current correction) function cannot turn ON.
・When an AIS function was ON and speed was set as "LOG".
Alarm message display position
A-39