Flow Of Operation - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3.1

FLOW OF OPERATION

Attention
Do not put anything on the operation panel. If you put anything hot on it, it
may be deformed.
Do not apply sudden force to the operation panel, trackball and controls.
３
Otherwise, some failure or damage may result.
POWER ON AND START
THE SYSTEM
OBSERVE AND ADJUST
VIDEO
TUNING OPERATIONS
ACQUIRE AND
MEASUREMENT DATA
END THE OPERATION AND
STOP THE SYSTEM
Each operation will be described in detail below.
3-1