List Of Alarms And Other Indications - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
List of Alarms and other Indications････････････････････････
Message
SET GYRO
TM RESET
POSN RST
Message
CPA/TCPA
GZ
LOST
Table 8.4 List of Operational Error Messages and Warnings
Error Message
OUT OF RANGE
CHANGE RANGE
MAX POINT
CAN'T TRANSMIT
MAX MARK
CAN'T CHANGE
NO GYRO DATA
INVALID DATA
NO POSITION DATA
CHG REL VECTOR
MAX TARGET
SELECT STRAIGHT
NOT ALLOWED
Table 8.2 List of Gyro Alarms
Requires initialization of NSK or setting of initial values for gyro.
Own ship's position has reached at approx. 60% of the radar PPI
radius in the TM mode.
Change the latitude and longitude sentence.
Table 8.3 List of ARPA Alarms
CPA/TCPA of a target (ARPA)
A target approaching own ship exists in a guard zone.
A target under acquisition can not be tracked.
Tried to create a guard zone outside the specified range.
The range is set outside the specified in creating a guard zone.
Tried to enter navigation information beyond the specified.
Tried to transmit within 1 second after standby or when the
transmitter-receiver has any trouble.
Tried to enter more than 20 plot marks.
Key in with the [+] or [-] at any place where only a numerical value
can be entered.
Any operation requiring Gyro data was made without it.
Tried to enter any data beyond its range.
Any operation requiring position data was made without it.
Tried to display a CPA ring in TRUE mode.
The maximum number of targets (50 targets) is under acquisition.
The operator set PM to ON without selecting straight.
Improper operation
8-14
Description
Description
Description
８