Range Adjustment - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
EXIT
1
Range Adjustment･････････････････････････････････････････
Adjust the range that the range of the target on the radar video is indicated correctly.
Procedures
1
2
3
4
5
（For example, assume that the actual range of
6
EXIT
1
2
3
Click EXIT .
The ADJUST Menu will be closed.
Click MENU on the screen. Or press OPTION2 key.
The MAIN Menu will appear.
Click CODE INPUT .
The CODE INPUT Menu will appear.
Click 0 , then END .
The ADJUST Menu will appear.
Click the "3.RANGE"edit box.
3.RANGE will be selected.
Find a target on the radar display the
range of which is already known.
the target is 0.33NM)
Using + and -
position of the target selected in step 4 above. Press END to
set it.
Move the target echo upward by
Click EXIT .
The ADJUST Menu will be closed.
Click EXIT .
The CODE INPUT Menu will be closed.
Click EXIT .
The MAIN Menu will be closed.
8-36
1.TUNE
2.BEARING
3.CPA RING
4.ANTENNA HEIGH
5.
6.
7.
０．
, adjust the target echo's position to the
+ and downward by
ADJUST
0-127 1.5
0.0-359.9゜ 000.0
0-999 10
3.OVER 25m
ARPA/AIS
SECTOR BLANK
MBS
EXIT
- .
８