JRC JMA-9922-6XA Instruction Manual page 118

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
[II] Setting the Mode when the EBL2 Starting Point is Moved
1
2
3
Exit
1
2
Notes • The course data and the own ship's latitude and longitude data are required
to activate this function.
• With this function ON, the starting point will be returned to the center if the
starting point of EBL is moved to outside the radar display.
Perform the operating procedure 1
and 2.
The EBL OFFSET ORIGIN Menu will appear.
"EBL2 L/L FIX" is set to the initial mode "OFF".
When the EBL2 starting point is moved, the
starting point of EBL2 will remain at the set
position on the radar display.
Select the "ON" radio button.
"EBL2 L/L FIX" will switch from "OFF" to "ON".
When the EBL2 starting point is moved to another
position, the starting point of EBL2 will be fixed at
the latitude and longitude on that position.
Left-click the "OFF" radio button.
The setting will switch from "ON" to "OFF".
Click EXIT .
The SETTING2 Menu will reappear.
Click EXIT .
The SETTING2 Menu will be closed.
3-46
SETTING2
EBL OFFSET ORIGIN
1.EBL1 L/L FIX
OFF ON
2.EBL2 L/L FIX
OFF
ON
EXIT
０．
３