JRC JMA-9922-6XA Instruction Manual page 108

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
[Ⅱ] Changing the Setting of Pull-down Menu
This method is used when there are three or more selections:
When PROC1 is set as shown below:
①
2. PROC1
Move the arrow cursor to the position that is shown below (downward triangle).
②
2. PROC1
Set the arrow cursor on the position in Figure
③
on the trackball.
2. PROC1
④ The pull-down menu will appear and selection items are displayed in the menu.
2. PROC1
1. OFF
2. PROC1
3. PROC2
4. PROC3
Move the cursor with the trackball.
⑤
2. PROC1
1. OFF
2. PROC1
3. PROC2
4. PROC3
Set the cursor on the item to be selected and press the left-button on the trackball.
⑥
3. PROC2
1. OFF
2. PROC1
3. PROC2
4. PROC3
The pull-down menu will be closed and the setting is established.
⑦
3. PROC2
▼
▼
as shown below and press the left button
▼
▼
▼
▼
▼
3-36
３