JRC JMA-9922-6XA Instruction Manual page 196

• œ • œ • œ • œ
Vector/Symbol
‚ T
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
Table 5.1 Definitions of Symbols
Tracked target
Dangerous target
(CPA/TCPA)
Initial acquisition
mark
Target with its data
indicated
Lost target
(This symbol appears
when a target cannot
be tracked for any
reason.)
Target that has entered
the guard zone
Trackball cross cursor
Post positions of
targets
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
Definition
Alarm characters (CPA/TCPA) appear and
an alarm sounds. The vector and symbol
blink.
Displayed after a target is acquired and until
its vector is displayed.
WhENTesignating a target's data indication
with the trackball, the target's symbol is
changed into •
indicated. However, in case of a lost target
or a dangerous target, its corresponding
symbol is displayed instead of • .
Alarm characters (LOST) appear and an
alarm sounds. No vector is displayed, but
the symbol blinks.
Alarm characters (GZ) appear and an alarm
sounds.
The symbol blinks.
This cursor is used to select a target when
acquiring manually, canceling targets and
for setting numerical data.
The symbols and vectors are only displayed
when [PAST POSN] is ON.
The position interval can be set to 0.5, 1, 2 or
4 minutes.
5-17
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
Remarks
and the target's ID is
• œ • œ • œ • œ