JRC JMA-9922-6XA Instruction Manual page 153

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
３
2 Select Equipment to Load the Read-out Navigational Information
Procedures
6 Enter a longitude value (XX゜XXX.XX') using any of 0 to 9.
7 Press SET .
The longitude value entered manually will be set up.
Note: The own ship's position entered manually is effective only in the NAV/MAP
INFO Menu.
In the case that any electronic positioning equipment such as GPS is
connected to the system, or that own ship's position is entered manually, the
data can be read out.
1 Click LOAD .
The LOAD Menu will appear.
2 Click DEVICE .
1.DEVICE will be selected and the pull-down
menu will appear.
０．
3-81
SUB1 MENU
NAV/MAP INFO
NAV/MAP
LOAD
1.DEVICE
1.INTERNAL
1.INTERNAL
LODE
2.
EXIT