JRC JMA-9922-6XA Instruction Manual page 169

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
［Ⅱ］Creating Maneuver Curve
Procedures
３
1 Click MENU , then SUB1 MENU and SUB1 MENU .
The EBL MANEUBER Menu will appear.
2 Click "ON" radio button of EBL MANEUVER.
"ON" in "1.EBL MANEUBER" will be set and a supplemental line, a maneuver
curve and WOL will appear on the radar display.
3 Set the starting point of the supplemental line using the
trackball and click to fix it.
The position of WOL (steering point) will change depending upon the starting
point of the supplemental line. If the WOL is behind own ship's position, the line
color of the WOL sill change.
4 Set the bearing of the supplemental line using the [EBL]
control.
The bearing of the supplemental line will be the bearing in which own ship will
finally move. The position of WOL will change depending upon the bearing of
the supplemental line. If WOL is behind own ship's position, the line color of the
WOL will change.
5 Select by left-clicking the trackball.
The setting will be established. However, if the WOL is behind own ship's
position, the entry of Click will be rejected and the setting will not be
established.
Note: If the [EBL] is pressed during the EBL MANEUVER operation,
the Menu will be closed and the maneuver curve creating
operation will be stopped.
3-97