JRC JMA-9922-6XA Instruction Manual page 168

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5
6
7
8
Note: If the initial setting is not correct, the maneuver curve will be
affected.
Click TURN MODE.
TURN MODE will be selected.
Select any turn mode.
RADIUS: Constant turn diameter (NM)
RATE: Constant turn speed (deg/min)
Click the numeric setting section of TURN SET .
TURN SET will be selected.
The numeric input dialogue box is opened.
Set the numeric value in the dialogue box.
Press END .
3-96
３