JRC JMA-9922-6XA Instruction Manual page 237

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
2-2 BUZZER
Procedures
1
2
3
1 Click EXIT .
Exit
2-3 LAMP
Procedures 1 Click the TEST on the screen.
2
3
1 Click TEST .
Exit
Note: When performing a LAMP test, the operation cannot be checked if the
Refer to (2) Checking Panel in Section 8.1.1 Function Check on Test Menu.
Click the TEST on the screen.
The TEST menu will appear.
Click PANEL TEST .
The PANEL TEST Menu will appear.
Click BUZZER .
The BUZZER Menu will appear. A beep of
the buzzer indicates that the operation is
normal..
The TEST Menu will be closed.
Refer to (2) Checking Panel in Section 8.1.1 Function Check on Test Menu.
The TEST menu will appear.
Click PANEL TEST .
The PANEL TEST Menu will appear.
Click LAMP .
The LAMP Menu will appear. The key
backlight is turned on, the operation is
normal.
The TEST Menu will be closed.
1.
2.
3.
０．
1.
2.
3.
０．
8-6
TEST MENU
PANEL TEST
KEY
BUZZER
LAMP
EXIT
TEST MENU
PANEL TEST
KEY
BUZZER
LAMP
EXIT
８