Display Of Navigational Information - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Display of Navigational Information････････････････････････
Navigational information such as waypoint marks, and a maximum of 256 point of NAV lines,
coastlines, depth contours and NAV marks can be created, displayed, read out, saved, edited
and cancelled. (This function is effective only when navigation equipment is connected to this
system.)
[I] Displaying Waypoint Marks
If waypoint information is sent from navigation equipment, a waypoint mark will appear on the
radar display. If the waypoint appears within the radar display, it is displayed as "○WP".
Procedures 1
2
3
4
Exit
1
2
Click the MENU on the screen.
The Main Menu will appear.
Click SUB1 MENU .
The Sub1 Menu will appear.
Click NAV/MAP INFO .
The NAV/MAP INFO Menu will appear.
Click "ON" radio button of WPT .
"ON" in 1.WPT will be set and the selected
waypoint mark will appear.
Click EXIT .
The Sub1 Menu will reappear.
Click EXIT .
The Sub1 Menu will be closed.
3-72
SUB1 MENU
NAV/MAP INFO
1.WPT
OFF ON
2. NAV DISP
3. NAV/MAP
4.GEODETIC
0
WGS-84
EXIT
０．
Geodetic system name display
area: The display changes
according to the geodetic
system No. in the right input
area.
３