Display Unit Ncd-4263; Coaxial Cable (Jma-9933-Sa) - JRC JMA-9922-6XA Instruction Manual

• œ • œ • œ • œ
Display Unit NCD-4263¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
Coaxial Cable (JMA-9933-SA)¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
‚ V
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
Do not wipe the radar display surface strongly with a piece of dry
cloth or do not use gasoline or thinner for cleaning. Otherwise,
the display surface may be damaged.
Dust accumulated on the radar display will reduce clarity and darken the video. For
cleaning it, wipe it with a piece of soft cloth (flannel or cotton). Do not wipe it strongly
with a piece of dry cloth nor use gasoline or thinner.
(1) The coaxial pipe gland of the coaxial cable will be provided with perfect water-tight
treatment at the time of installation. Check it and ensure that not water leak occurs
from the connection parts. In particular it is recommended to apply paint to the
coaxial pipe gland every six months.
Do not give strong impact to the coaxial cable by hitting it with
any tool or hammer.
Otherwise, it may be broken.
Do not put any heavy article on the coaxial cable. Otherwise, it
may be broken.
Do not twist or pull the coaxial cable. Otherwise, it may be
broken.
(2) For further details, refer to the Coaxial Cable Connection Procedures for the S band
Radar.
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
WARNING
WARNING
7-5
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ • œ • œ • œ • œ