Simulation - JRC JMA-9922-6XA Instruction Manual

• œ • œ • œ • œ • œ • œ • œ • œ • œ
¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥

Simulation

Do not change the VD LEVEL and VECTOR CONSTANT,
because they are already set to the optimum values. Making
any changes to these may cause deterioration in the ARPA
performance.
Pseudo targets are generated in certain known positions to check whether the ARPA
processing circuits are operating normally. Since the pseudo targets move according to
known parameters, the values for these pseudo targets can be compared with the known
values by acquiring, tracking and displaying them, and thereby checking whether the ARPA
system is operating normally.
This function should be used only in the standby
mode.
Procedures
1
2
3
4
• œ • œ • œ • œ • œ • œ • œ • œ • œ
CAUTION
TX
Press to set
STBY
the standby mode.
Click TEST on the screen.
Or press OPTION1 key.
The TEST Menu will appear.
Click ARPA TEST .
The ARPA TEST menu will appear.
Click the • g 1.SIMULATOR • h edit
box.
SIMULATOR is selected, and the pull down
menu is displayed.
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
1. SIM ULATOR
2. TEST VIDEO
3.
0.
5-30
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
T E S T M E N U
ARPA TEST
1. OFF
1. OFF
2. SCENA RIO1
3. SCENA RIO2
STA US
EXIT
‚ T