1-3. Ais Function On/Off - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

1-3. AIS Function ON/OFF

■ON/OFF of AIS function is set up. There are two methods to switch ON/OFF of AIS function.
Operation
procedure
(Method-1 : With the AIS software button on screen.)
Put the arrow cursor on the
button of the track ball. Every time the left section button is pressed, AIS function on/off
changes alternatively as follows.
a. When the symbol is displayed in the bright color -----AIS function is ON.
b. When the symbol is displayed in the dark color -------AIS function is OFF.
(Method-2 : With the menu operation.)
1. Left-click MENU on the screen.
2. Left-click SUB1 MENU .
3. Left-click ARPA/AIS .
4. Left-click AIS SETTING.
5. Left-click "ON" or "OFF" of "1.AIS FUNCTION".
Note:
When AIS function is OFF, no AIS symbol is displayed and all AIS functions are completely
turned off. Even if there is a dangerous target, AIS function would not be turned on
automatically.
F
Main menu opens.
SUB1 menu opens.
ARPA/AIS menu opens.
AIS SETTING menu opens.
"1.AIS FUNCTION" is changed to on or off.
button at the lower left a screen and click the left
A-21
SUB1 MENU
ARPA
1. CPA LIMIT
0.1-99nm 1.5 △
▽
2. TCPA LIMIT
△
1-99min 10
▽
3. CPA RING
OFF ON
4. TRIAL
5. GATE
2. NARROW
▽
6. AIS SETTING
0. EXIT