Using The Trial Function - JRC JMA-9922-6XA Instruction Manual

• œ • œ • œ • œ • œ • œ • œ • œ • œ
Using the TRIAL Function¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥
Procedures
1
2
3
4
5
Cancellation
1
Exit
1
2
• œ • œ • œ • œ • œ • œ • œ • œ • œ
Press the MENU or OPTION2 key on the screen.
The ARPA menu will be opened.
Click SUB1 MENU , then ARPA/AIS and TRIAL .
The ARPA TRIAL menu will be opened.
Left-click • g ON • h under • g 1.TRIAL • h .
"1.TRIAL" will be turned "ON" and the character "T" will blink below the own ship
display in the radar screen, indicating that the system is conducting a trial.
Make the settings with the course [EBL] control and speed
[VRM] control.
The plot data symbols are "• ¢ " for dangerous targets and "• › "
for safe targets.
Select OFF under TRIAL in the ARPA TRIAL menu.
"OFF" will be set for "TRIAL" and the system will return to the normal display.
Click EXIT .
The ARPA TRIAL menu will be closed.
Click EXIT .
The ARPA menu will be closed.
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
5-26
• œ • œ • œ • œ • œ • œ • œ • œ • œ • œ
‚ T