1-5 Ais Target Deactivation - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

1-5 AIS Target Deactivation

When an AIS target is deactivated, the vector and the heading are deleted as a
2
sleeping target.
(Method-1 : With the software button on the screen)
Operation
1. Put the arrow cursor on the DACT button and click the track ball section left
procedure
button.
Cursor mode "AIS DEACT" is displayed at the upper right side on the screen.
2. Put the cross cursor "+" on the target to be deactivated and press the track ball
section left button .
The selected AIS target is deactivated.
(Method-2 : With the menu operation)
1. Left-click MENU on the screen.
2. Left-click SUB1 MENU .
3. Left-click ARPA/AIS .
4. Left-click AIS SETTING.
5. Left-click "ON" of "3.AIS DEACTIVATE".
6. Put the cross cursor "+" on the target to be deactivated and press the track ball section
left button . The selected AIS target is deactivated.
Note
This operation is only available for an activated target.
Refer to "1.9 Definitions of AIS Target Symbols" about the sleeping target.
※ 2
Main menu opens.
SUB1 menu opens.
ARPA/AIS menu opens.
AIS SETTING menu opens.
Cursor mode "AIS DEACT" is displayed at the upper right side on the
screen.
A-24