1.6 Ais Symbol Display On/Off - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●

1.6 AIS SYMBOL DISPLAY ON/OFF

AIS symbol display is changed to on or off by the procedure method-1 or method-2 as follows.
Operation
procedure
(Method-1 : With the software button on the screen)
Put the arrow cursor on the
time the left button is pushed, AIS symbol display is changed to on or off.
When the button is displayed in the bright colour ----- AIS Symbol display is on.
When the button is displayed in the dark colour ----- AIS Symbol display is off.
(Method-2 : With the menu operation)
1. Left-click MENU on the screen.
2. Left-click SUB1 MENU .
3. Left-click ARPA /AIS .
4. Left-click AIS SETTING.
5. Left-click "ON" or "OFF" of "4.AIS SYMBOL DISPLAY".
Note
The ARPA symbol display can only turned OFF when the AIS function id ON.
Turning the AIS function OFF will automatically return ARPA symbols display back ON.
button and click the track ball section left button. Each
Main menu opens.
SUB1 menu opens.
ARPA/AIS menu opens.
AIS SETTING menu opens.
AIS symbol display is changed to on or off.
A-25