JRC JMA-9922-6XA Instruction Manual page 162

12 to 18NM
● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
PM Pattern
３
2 Checking Transmitter System
The value of the TRANSMIT POWER indicator bar graph in the test menu indicates the
value corresponding to the transmission output power. If the indicated value becomes
extremely short against the bar length checked at the initial time, it is necessary to
request for checking of the transmitter system by a service engineer.
3-90