JRC JMA-9922-6XA Instruction Manual page 156

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
5 ERASE (Erase saved navigational information)
Procedures 1
2
3
6 SHIFT (Shift navigational positions except own ship's mark)
Procedures 1
2
3
4
Click ERASE .
The ERASE Menu will appear.
Place the cursor over one of the
numbers 1 through 0 (ten in all),
then click.
Click YES to the question "FILE
ERASE OK?" to erase the
information.
The elected number of navigational
information will be erased.
Click NO to stop erasing the information.
The position of any navigational information
such as NAV lines, coast lines, depth
contours, and other marks except own ship's
mark can be corrected manually.
Click SHIFT .
SHIFT will be selected. NAV SHIFT will
appear in the CURSOR ( ) at the upper right
of the radar display.
Move the cross cursor mark to an
element of a line such as NAV line,
coast line, depth contour line, or a
mark using the trackball.
Click the trackball section left
button.
A line or mark to correct will be set up.
Move the cross cursor mark to any point to which a line or
mark will be shifted, using the trackball.
3-84
SUB1 MENU
NAV/MAP INFO
NAV/MAP
ERASE
TOKYO
1.
2. * * * * *
3.
4.
FILE ERASE OK?
5.
1. Y E S 2. N O
6.
7.
8.
9.
0.
EXIT :
PRESS EXIT
SUB1 MENU
NAV/MAP INFO
NAV/MAP
1.OS POSN
N 00' 00. 000'
W 00' 00. 000'
2. LOAD
SAVE
3.
ERASE
4.
5. EDIT
6. SHIFT
7. SHIFT CLEAR
EXIT
０．
３