JRC JMA-9922-6XA Instruction Manual page 238

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
3 ARPA TEST
3-1 SIMULATOR
Procedures
Exit
８
brilliance level of the key backlight is at maximum. (The brilliance will not
change)
Refer to (3) Checking ARPA in Section 8.1.1 Function Check on Test Menu.
1 Press TX
STBY
mode.
2 Click the TEST on the screen.
The TEST menu will appear.
3 Click RPA TEST.
The ARPA TEST Menu will appear.
4 Click SIMULATOR .
"1.SIMULATOR"will be selected and the
pull-down menu will appear.
5 Select any setting item of ARPA
Simulator in the pull-down menu
and press any of 1 to 7.
TX
6 Press
STBY
1 Click TESE .
The TEST Menu will be closed.
Note: In normal operation, it is necessary to turn off the "SIMULATOR".
to set the standby
to set the transmission mode.
8-7
TEST MENU
ARPA TEST
1.SIMULATOR
1.OFF
2.TEST VIDEO
1.OFF
1.OFF
3. STATUS
2.VDG
3.VDH
4.VDL
5.VDIN
EXIT
０．