Time/Day Display Setting - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
Time/Day Display Setting･･･････････････････････････････････
In displaying the time, it is necessary to set the LOCAL TIME, LOCAL DATA and GMT +/-.
Procedures
1 Click MENU on the screen.
2 Click SUB1 MENU, then STTING1 .
The STTING1 Menu will appear.
3 Click TIME/DAY .
The TIME/DAY Menu will appear.
4
- If the time of day is not to be displayed -
5-1 Left-click on "OFF" to select no time display.
- If UTC (Universal Coordinated Time) is to be displayed -
5-2 Left-click on "UTC" to select UTC display.
- If LOCAL (Location Time) is to be displayed -
5-3 Left-click on "UTC" to select local time display.
Or press OPTION2 key.
The MAIN Menu will appear.
Click "1.UTL/LOCAL" edit box.
The UTL/LOCAL pull-down menu will appear.
1) Left-click in the"2.LOCAL TIME"edit
box.
The numeric input dialogue box will be
opened.
2) Enter any local time using 0 to 9 and
press END to set it up.
The LOCAL TIME will be set.
3) Left-click in the"3.LOCAL DATE"edit
box.
The numeric input dialogue box will be
opened.
4) Enter any local date sing 0 to 9 and
press END to set it up.
The LOCAL DATE will be set.
5) Left-click in the"4.GMT + / -"edit box.
The numeric input dialogue box will be
opened.
8-50
SUB1 MENU
SETTING1
TIME/DAY
1.UTC/LOCAL
1.OFF
1.OFF
2.CPA RING
2.UTC
3.LOCAL
3.LOCAL DATE
1999/01/27
4.GMT +/-
+/- 12:00 0:00
EXIT
０．
SUB1 MENU
SETTING1
TIME/DAY
1.UTC/LOCAL
1.OFF
2.CPA RING
00:00
3.LOCAL DATE
1999/01/27
4.GMT +/-
+/- 12:00 0:00
EXIT
０．
８