Function - JRC JMA-9922-6XA Instruction Manual

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
FUNCTION･･･････････････････････････････････････････････
FUNCTION is a function of setting the process suited for each condition during navigation to
enhance the target detection performance.
Setting items: The following nodes can be switched over.
３
Procedures
Exit
Cancellation
FUNC1: Effective in observing the echoes on short ranges.
FUNC2: Effective in observing the echoes on long ranges.
FUNC3: Effective in observing the echoes in rough weather.
FUNC4: Set by service personnel. The initial setting is the same as FUNC1.
FUNC5: Set by service personnel. The initial setting is the same as FUNC1.
1 Click the MENU on the screen.
The Main Menu will appear.
2 Click FUNCTION.
4.FUNCTION will be selected and the
pull-down menu will appear.
3 Select a desired process setting
item from the click.
The process setting item will be changed and
the current setting state will appear at the
lower right of the radar display.
4 For changing the setting item, open
the pull-down menu in step 2 above
again and select a desired process
setting item.
1 Click EXIT .
The Main Menu will be closed.
1 Execute the procedures to function up to step 2.
4.FUNCTION will be selected and the pull-down menu will appear.
2 Click EXIT .
1.FUNC OFF will be set and "FUNC OFF" will appear the lower right of the
radar display.
1.IR
2.TGT ENH
3.PROCESS

4.FUNCTION

5.EBL1
6.EBL2
7.
8.
9.
０．
3-65
MAIN MENU
OFF
ON
ON
OFF
2.PROC1
1.FUNC OFF
1.FUNC OFF
2.FUNC1
CENTER OFFSET
3.FUNC2
4.FUNC3
CENTER
OFFSET
5.FUNC4
DATA OFF
6.FUNC5
SUB1 MENU
DEGAUSS
EXIT