JRC JMA-9922-6XA Instruction Manual page 278

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ●
4-2 LOG Setting
(1)
4-3 Selection of Data against Water for 2-axis Log (NMEA Signal)
(1)
4-3 Selection of Data against Ground for 2-axis Log (NMEA Signal)
(1)
Attention
The speed data cannot be selected when the sentence VBW of NMEA0183
is not entered.
EXIT
1
2
3
Click 1AXIS for 1-axis log.
2.1AXIS will be set.
Click 2AXIS W .
3.2AXIS W will be set.
Click 2AXIS G .
4.2AXIS G will be set.
Click EXIT .
The SUB1 Menu will reappear.
Click EXIT .
The SUB1 Menu will be closed.
Click EXIT .
The MAIN Menu will be closed.
8-46
８