Table of Contents
Advertisement
Chapter 12 SPECIFICATIONS
12.6 DISPLAY
12.6.1 INTEGRATED DISPLAY UNIT (NCD-2256)
1) Structure
2) Dimensions
3) Mass
4) Tune Method
5) STC (SEA)
6) FTC (RAIN)
7) Radar Interference Rejection
8) Bearing Marker
9) Heading Line
10) Off Center
11) True Motion Unit
12) True Motion Reset Position
13) Radar trail indication
14) Variety of Pulse width SP1/ SP2/ SP3/ MP1/ MP2/ LP1/ LP2
15) Target enhance
142
Desk Top Integrated Type
(LCD Monitor Unit/Keyboard Unit/Processor Unit Integrated Structure)
Vertical installation only desk top integrated type
Option: Overhead Mounted kit installation
Height 235.2mm × Width 162mm × Depth 77.3mm
(The U style mount base and the both sides knob bolts are
included.)
Approx. 1.7kg(Without Sun cover)
Manual / Auto
(Bar-graph indication is displayed at the time of adjustment.)
Manual / Auto
Manual / Auto
Built-in (The effect can be adjusted by three stages.)
360° in 5° digit
Electronic
move to the defined coordinates of 4 patterns
(4 patterns are back side 64dots,left side 92dots, front side
92dots, right side 92dots from the default center position)
Transition of the radar trails is possible during Off Center mode.
Built-in (Not available at the maximum range)
40% of radius of any range
True motion mode:
Relative motion mode:
Trail time length:
Arbitrary trail time length can be displayed at any time.
Possible to display time series trail and continuous trail
by color classification.
* When switching to true/relative trails, the radar trails
are cleared. Transition of the trails is possible during Off
Center mode (Relative motion). (Scroll)
When the bearing mode is switched (RM (T), TM), the
radar trails are taken over at between RM (T) and TM.
(LP2 is JMA-1034 only)
3 stages
Only true motion trails
True or relative motion trails
15 sec to 15 min/Continuous
30 sec to 30 min/Continuous
1 min to 1 hr/Continuous
30 min to 24 hr/Continuous
Advertisement
Table of Contents
