Extending The Server From The Rack - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual

Removal and Replacement Procedures
Figure 3: Locating and removing the Torx T-15 tool

Extending the Server from the Rack

To perform service procedures, you must extend the server from the rack
To extend the server from the rack:
1. Loosen the thumbscrews that secure the server to the front of the rack.
Figure 4: Loosening the front panel thumbscrews
2. Extend the server on the rack rails until the server rail-release latches engage.
24 NAS e7000 v2 Maintenance and Service Guide