Figure 7: Unlocking and sliding the rear access panel open
4. Slide the rear access panel toward the front of the server (1).
5. Push and hold the access panel release lever down (2) while sliding the rear access panel
Note:
the next step.
Figure 8: Opening the rear access panel
6. Align the guide marks on the rear access panel and the chassis, and lift the rear access
NAS e7000 v2 Maintenance and Service Guide
1
forward about 2.54 cm (1 inch).
The guide marks on the rear access panel and the server must line up before proceeding to
panel from the server.
2
1
Removal and Replacement Procedures
2
27