Memory Board - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual
Hp storageworks nas e7000 v2 maintenance and service guide
Hide thumbs
Also See for 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server:
- Release note (30 pages) ,
- Installation manual (29 pages) ,
- Application notes (19 pages)
Table of Contents
Advertisement
Connectors, LEDs, and Switches
Memory Board
Figure 73
for specific memory modes.
Figure 73: Memory board LEDs
104
Caution:
After the server is powered down, wait 15 seconds and then check the LED
illumination pattern before unplugging the cable from the battery module. The LEDs are not
visible with the rear access panel on.
If the amber LED blinks after 15 seconds, do not remove the cable from the battery
module. This module is backing up data, and data is lost if the cable is detached.
If neither LED blinks after 15 seconds, it is safe to remove the cable from the battery
module.
When the server is on, review the POST message before plugging or unplugging the cable
from the module.
and
Table 28
through
2
5
3
1
4
On-Line Spare
7
8
B
5
6
3
4
A
1
2
10
13
11
12
Table 31
identify the memory board LEDs and their statuses
7
6
NAS e7000 v2 Maintenance and Service Guide
9
8
Online Spare Status
Mirroring Status
Ready to Hot Plug
Advertisement
Table of Contents
