Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual page 75

To remove the battery:
1. Power down the server. Refer to "Powering Down the Server" in this chapter.
2. Extend the server from the rack. Refer to "Extending the Rack from the Server" in this
3. Open the rear access panel. Refer to "Opening and Removing the Rear Access Panel" in
4. Remove the memory boards. Refer to "Removing a Memory Board" in this chapter.
5. Locate the battery on the system board.
Figure 51: Locating the battery on the system board
6. Remove the battery (part number 175115-001) from the system board.
Figure 52: Removing the battery from the system board
NAS e7000 v2 Maintenance and Service Guide
chapter.
this chapter.
Removal and Replacement Procedures
75