Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual page 102

Connectors, LEDs, and Switches
Figure 71: Internal PCI Hot Plug LEDs and button
Table 26: Internal PCI Hot Plug LEDs and Button
Note: If the any of the LEDs indicates an error, refer to the
Administration Guide
102
Item Description
1
Slot fault LED
2
Slot power LED
3 PCI Hot Plug button (port)
for information on PCI-X technology and troubleshooting.
2
1
3
Status
Amber = Slot requires attention. There may be a
problem with the slot, the PCI board, or the driver.
Check the green LED before opening the slot.
Off = Slot does not require attention.
Green = Power is applied to the slot. Do not
open.
Blinking green = Power to slot is being turned off
or on. This process may take several minutes. Do
not open the slot release lever until the green LED
is completely off. Do not open.
Off = You may replace or remove a board in this
slot only.
HP StorageWorks NAS e7000 v2
NAS e7000 v2 Maintenance and Service Guide