Removing A Dimm - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual
Hp storageworks nas e7000 v2 maintenance and service guide
Hide thumbs
Also See for 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server:
- Release note (30 pages) ,
- Installation manual (29 pages) ,
- Application notes (19 pages)
Table of Contents
Advertisement
Figure 18: Removing a memory board
Removing a DIMM
To remove a DIMM:
1. Remove the memory board. Refer to "Removing a Memory Board" in this chapter.
2. Place the memory board on a level, nonconductive surface.
3. Open the DIMM slot latches (1).
4. Remove the DIMM from the DIMM slot (2).
Figure 19: Removing a DIMM
NAS e7000 v2 Maintenance and Service Guide
3
3
2
4
1
2
1
2
Removal and Replacement Procedures
1
43
Advertisement
Table of Contents
Related Manuals for Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server
Related Products for Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server
- Compaq 230050-001 - StorageWorks NAS B3000 Model N900 Server
- Compaq 258124-001 - StorageWorks NAS B3000 Model C900s Server
- Compaq 292280-001
- Compaq 230538-001 - P 1210 - 22" CRT Display
- Compaq 230535-001 - P 910 - 19" CRT Display
- Compaq 239158-999 - Mini Tower - Power Supply 250 Watt
- Compaq 238618-001 - Evo Thin Client
- Compaq 233789-371
Need help?
Do you have a question about the 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server and is the answer not in the manual?
Questions and answers