Rack Stability
WARNING: To reduce the risk of personal injury or damage to the equipment,
be sure that:
Getting Help
If you have a problem and have exhausted the information in this guide, you
can get further information and other help in the following locations.
Compaq Technical Support
You are entitled to free hardware technical telephone support for your product
for as long you own the product. A technical support specialist will help you
diagnose the problem or guide you to the next step in the warranty process.
In North America, call the Compaq Technical Phone Support Center at
1-800-OK-COMPAQ
Outside North America, call the nearest Compaq Technical Support Phone
Center. Telephone numbers for world wide Technical Support Centers are
1
For continuous quality improvement, calls may be recorded or monitored.
Power Supplies or Systems marked with these symbols
indicate the equipment is supplied by multiple sources of
power.
WARNING: To reduce the risk of injury from electrical shock,
remove all power cords to completely disconnect power from
the system.
The leveling jacks are extended to the floor.
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single rack
installations.
The racks are coupled together in multiple rack installations.
A rack may become unstable if more than one component is extended for
any reason. Extend only one component at a time.
1
. This service is available 24 hours a day, 7 days a week.
About This Guide vii
Need help?
Do you have a question about the SW TL881 DLT Mini-Lib/1 and is the answer not in the manual?
Questions and answers