Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual page 119

Note:
8. Check the server for the following normal power-up sequence to be sure that your system
9. View the monitor for the following messages; be sure your system meets the minimal
Note:
options.
10. The operating system loads to complete the boot process.
If the server completes POST and attempts to load the operating system, go to the "Problems
After Initial Boot" section in this chapter.
NAS e7000 v2 Maintenance and Service Guide
If the server does not restart, proceed to the section, "Diagnostic Steps."
meets the minimal hardware requirements and is powered up during normal operations:
a. The power button LED turns from standby (amber) to on (green).
b. The fans start up. It is normal for the fans to initially run at full speed and then slow
down.
hardware requirements and is powered up during normal operations:
a. HP StorageWorks logo
b. BIOS information
c. Copyright information
d. Processor initialization
e. Multi-initiator configuration
Select the multi-initiator configuration utility (ctrl-a) only to support HP storage and clustering
f. PXE initialization
g. Option ROMs
h. SCSI devices
Troubleshooting
119