Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual page 65

Removal and Replacement Procedures
Figure 40: Pressing the PCI-X retaining clip
6. Push the tab on the expansion slot latch (1).
7. Swing the latch back to unlock the expansion board (2).
8. Remove the board from the slot (3).
1
3
2
Figure 41: Removing an expansion board from a non-hot-plug slot
Reverse steps 1 through 8 to replace an expansion board.
NAS e7000 v2 Maintenance and Service Guide 65