Figure 55: Cutting the cable tie-wraps
23. Remove the seven cable clips:
Figure 56: Removing the cable clips
24. Use the Torx T-15 tool or screwdriver to remove the eight screws that secure the power
25. Remove the cords from the connectors (2).
26. Remove the connectors from the server (3).
NAS e7000 v2 Maintenance and Service Guide
a. Lift to disengage the cable clip (1).
b. Slide the clip forward, and lift it off the chassis (2).
2
1
1
supply connectors to the chassis bottom (1).
Removal and Replacement Procedures
79