Processors - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual

Processors

To remove a processor:
1. Power down the server. Refer to "Powering Down the Server" in this chapter.
2. Extend the server from the rack. Refer to "Extending the Rack from the Server" in this
3. Open the rear access panel. Refer to "Opening and Removing the Rear Access Panel" in
4. Remove the processor air baffle. Refer to "Processor Air Baffle" in this chapter.
5. Loosen the thumbscrew on the processor retaining bracket (1).
6. Open the processor retaining bracket (2).
Figure 38: Opening the processor retaining bracket
7. Remove the PPM. Refer to "Processor Power Modules (PPMs)" in this chapter.
8. Move the processor-locking lever to the unlocked position (1).
9. Lift the processor/heatsink assembly straight up from its socket (2).
NAS e7000 v2 Maintenance and Service Guide
chapter.
this chapter.
1
2
Removal and Replacement Procedures
63