System Battery - Compaq 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server Maintenance And Service Manual
Hp storageworks nas e7000 v2 maintenance and service guide
Hide thumbs
Also See for 230039-001 - StorageWorks NAS Executor E7000 Model 904 Server:
- Release note (30 pages) ,
- Installation manual (29 pages) ,
- Application notes (19 pages)
Table of Contents
Advertisement
Removal and Replacement Procedures
5. Remove the front access panel. Refer to "Removing the Front Access Panel" in this
6. Disconnect any SCSI cables from the SCSI backplane. Refer to "SCSI Cables" in this
7. Loosen the thumbscrew (1).
8. Remove the SCSI backplane from the chassis (2).
Figure 50: Removing the SCSI backplane
Reverse steps 1 through 8 to replace the SCSI backplane.
System Battery
74
chapter.
chapter.
WARNING:
This server contains an internal lithium manganese dioxide or vanadium
pentoxide battery. There is risk of fire and burns if the battery pack is not handled properly.
To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose to temperatures higher than 60×C.
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or
water.
Replace only with the HP spare designated for this server.
Caution:
Do not dispose of batteries, battery packs, and accumulators with the general
household waste. To forward them to recycling or proper disposal, use the public collection
system or return them to either HP or your authorized service provider.
2
1
NAS e7000 v2 Maintenance and Service Guide
Advertisement
Table of Contents
